Replacement rubber band for TAG Heuer Aquaracer 300 & 500. 21/22mm, 120+90mm, folding buckle, water-resistant. Same dimensions restored — buy now.
79,50 $ 59,50 $
Description
The Aquaracer 300 and Aquaracer 500 are TAG Heuer’s two serious dive references — the 300 at the entry of professional water resistance, the 500 at a depth where diving stops being casual and the equipment specification becomes critical. Both wear rubber as the native band for water use. Both need replacing when that rubber has given its service life. The TAG Heuer Aquaracer 300 / 500 Replacement Rubber Band serves both: high-quality rubber at 21mm or 22mm, 120mm + 90mm, folding buckle at 18mm, water-resistant for all aquatic activities. The replacement band that covers both serious Aquaracer references, at the dimensions that already fit.
Both Aquaracer References. The Correct Dimensions. Replaced.
- High-quality rubber — the replacement in the material the Aquaracer earned — rubber on the Aquaracer 300 and 500 isn’t a compromise; it is the correct specification for a band worn in and near water with regularity. The replacement high-quality rubber begins where the previous band left off: water-resistant across saltwater, chlorine, and freshwater submersion, flexible through the temperature range from cold open-water to heated pools, and maintenance-free between sessions. The next band starts where the last one started — in the same material, for the same uses.
- Aquaracer 500 — the deeper-rated reference, now covered — the Aquaracer 500’s 500-metre rating places it in the company of dedicated professional dive watches. Its rubber band wears harder than the 300’s — more submersions at greater depths, more contact with diving equipment, more sustained saltwater exposure. The replacement band at the correct 21mm or 22mm width serves the Aquaracer 500 owner who has run a previous rubber band through the conditions this reference was designed for.
- 21mm and 22mm — both widths for both references — the Aquaracer 300 and 500 carry both 21mm and 22mm across their reference ranges. Both widths are available in the replacement rubber, each correctly built to the case dimension the previous band occupied.
- 120mm + 90mm — the dimensions that already fitted — the 90mm short section accommodated the wrist, the wetsuit, or the extended adjustment the previous band required. The replacement arrives at the same dimensions, restoring the correct fit without requiring a remeasurement exercise or a new hole position.
- Folding buckle at 18mm — the closure, restored — the same folding mechanism that confirmed correct closure before water entry on the previous band performs the same function on the replacement. The familiar action, the same positive engagement — the band as the wearer knew it, in new condition.
For the Aquaracer 300 and 500 Owner Whose Band Has Done Its Work.
The rubber band on an Aquaracer 300 or 500 worn actively doesn’t need to fail to need replacing. It needs replacing when the material has completed its service cycle: the surface showing the micro-wear of repeated equipment contact, the fold carrying the permanent crease of thousands of buckle closures, the rubber no longer presenting as new. That is not a failure — that is the band that worked. This replacement continues the series.
This band is the right choice for:
- Aquaracer 500 owners who have run a rubber band through the active use the 500-metre reference implies and need the correct-width replacement at the same dimensions the previous band occupied.
- Aquaracer 300 owners replacing a worn rubber band and wanting both references served by a single listing rather than sourcing from two separate product pages.
- 90mm short-side wearers who required the longer short section for correct closure on a larger wrist or over a wetsuit sleeve, and want the replacement to restore that specific dimension rather than settling for a standard 75mm or 80mm alternative.
- Active divers on replacement cycle who maintain their Aquaracer bands on a regular replacement schedule and want the same specification sourced consistently across replacement purchases.
Specifications
| Detail | Specification |
|---|---|
| Material | High-Quality Rubber |
| Compatibility | TAG Heuer Aquaracer 300, Aquaracer 500 |
| Width Options | 21mm and 22mm |
| Long Side Length | 120mm |
| Short Side Length | 90mm |
| Buckle Type | Folding Buckle |
| Buckle Size | 18mm |
| Water Resistance | Yes — all aquatic activities |
Both Aquaracer references, both widths, the band that worked. Add to cart today.

























